How to Install a Patio Glass Door?

How to Install a Patio Glass Door?

Warning: Illegal string offset 'content_type' in /home/customer/www/ on line 101

If you want to enjoy the beautiful view of the green plants and flowers in your garden, consider installing the patio glass door. It will allow you to properly experience the beauty of your backyard without even leaving your house. Installing a patio door is not a tough job if you know the tricks and have the right tools. If you are planning to install the patio door yourself, here we have the step by step guideline to help you out.

Tools and material

Here are some of the important tools that you must have while you are installing the patio glass door.

  1. Hammer
  2. Circular Saw
  3. Chisels
  4. Wood shims
  5. Pry Bar
  6. Silicone Caulk
  7. Level
  8. Drill
  9. Patio Door
  10. Screws
  11. 10d Finishing Nails

Installation of the patio door

Here is a step by step guide that you need to follow in order to install the patio door properly.

Step 1

In the rough opening, you have to test fit the door. Make any required adjustments from the inside. Make the door square and plumb by shimming as much as required.

Step 2

Make the brick mold around the perimeter of the door. In case you are planning to use vinyl siding you will need to add a little extra space to accommodate the pieces of channel trims that you will have to install between siding and brick mold.

Step 3

Use a circular saw and blade to cut along the line of the door and assure that it is set deep enough to cut through the siding. Near the ground and in the corners you may have to use a chisel. If you will remove the siding from this area it will allow the door to sit in recess against framing and sheathing. It will let the siding butt against sides of your brick mold.

Step 4

Have a piece of drip edge equal to the rough opening of the door. With the silicone caulk, you have to insert the drip edge into the rough opening between the siding and building paper.

Step 5

Take building paper and cut 8 to 10 inches strips. Insert these strips between the existing building paper and siding towards outside wall. Wrap its edges into the rough opening and use staple to keep building paper in its place against framing studs.

Step 6

Where siding meets the building paper, you have to apply silicone caulk around its edges. At the place where threshold will sit you have to apply liberal beads along its bottom.

Step 7

You have to install the door in the rough opening to assure that it sits square and plumb. If there is rough space between the door and frame, considering adding shims after every 6 inches to fill the space.

Step 8

After every 12 inches, you have to install shims at the top of the door and around its edges. Use additional shims if you have swing style door. You have to maintain the level of everything.

Step 9

Your brick mold should be flat against your framing lumber from outside. Use 10d finishing nails and pass them from the brick mold into the frame every 12 inches as well as in corners of the door frame. You have to countersink the heads of nails.

Step 10

Again, drive 10d nails from inside of the house towards outside with shims and in the framing. Again, countersink nails.

Step 11

Screw the threshold to the floor.

Test the door once you have installed it. Assure that you manage everything properly, so you will not have to deal with any issues.

Posted by Lion of American Sliding Doors Inc, Professional Sliding Doors Repair in Miami, FL.

How a professional mobile locksmith duplicate a car key in your place?

How a professional mobile locksmith duplicate a car key in your place?

Warning: Illegal string offset 'content_type' in /home/customer/www/ on line 101

Have you lost your keys? Is the car key broken and you do not know where to get the best one? Do you want to go on a business trip and you cannot wait for the car company to deliver the new key? Do not worry because mobile locksmith service providers can help you in this case. Here are some of the ways they can use to duplicate your car key and get you back on the road.

Obtain VIN.

First get the VIN number from the dashboard or motor straight of the auto that needs a substitution key made. Additionally record the correct make, model, and year of the vehicle. On the off chance that the VIN is elusive, look at the vehicle’s title or protection printed material to discover.

Services for old cars

If your auto is old, contact a locksmith. More established autos, particularly those made by non-extravagance makers, have the least demanding keys to supplant. Influencing a call to the nearby auto locksmith to can take care of the entire issue now and again. This works for various autos, and a locksmith can wind up sparing you a great deal of cash contrasted with a dealership.

Services for modern car

If a cutting edge auto, check whether a locksmith is fit for duplicating it. In the event that the key is more current, the shape might be excessively mind-boggling for a nearby locksmith or the key may should be customized to work with a specific vehicle. For whatever length of time that the writing computer programs is advanced and not a code laser-scratched onto the key, a great auto locksmith ought to have the capacity to deal with it. Since there is such a great amount of assortment among auto keys, this progression can be simple for a few and to a great degree dubious for others.

The cost of duplicate services are

The cost of duplicate car keys that you will have to pay is.

  1. At your nearby handyman shop, the cost of copying an essential key reaches from $1.25 to $2. As a general rule, your nearby tool shop can just copy fundamental/standard keys.
  2. At a locksmith shop, the cost of copying a car key extends from $1.50 to $4, yet as expressed before they will have a more extensive exhibit of key spaces for auto proprietors to browse.
  3. At a locksmith shop, the cost of copying auto keys with extra highlights begins at $120. The variety in cost depends generally on the sort of auto key clear that you require.
  4. At a car dealership, the cost for copying auto keys runs upwards of $150. The difference in these costs is basically on the grounds that car merchants, as a rule, don’t supplant fundamental auto keys. The keys that they work with are generally transponder keys or key dandies.

Make sure that you always hire the best and reliable mobile locksmith service providers. Do not trust anyone. You have to assure that they have the tools and technologies to provide you the best services. Compare the cost and services of different mobile locksmiths to find the best one.

Posted by Joseph, a locksmith at 24 seven locksmith toronto.